Out of stock on Stock
GRBB48011754PS

Force III+ Super Power Battery Pack 48V 17,5Ah Panasonic / Sanyo

Super Power Force III+ Battery Pack 48V 17,5Ah with Panasonic / Sanyo

€759.00
incl. 19% VAT. excl. shipping

Super Power Frame Battery Force III+ Panasonic / Sanyo 48V 17,5Ah

with high quality 13S5P - Sanyo NCR18650GA 3500mah / 840 W/h

charging circuit voltage 54.6V

Lockable housing complete with mounting rail with 30cm cable and Anderson connector

BMS with 30A continuous discharge voltage up to 60A

DC charging connection

On / off button integrated charge indicator

We recommend this product for motors with the following features 48V 750W - 1000W - 1200W and specifically for Bafang BBSHD 48v-1000w mid-engine *** Recommended tool for mounting this frame battery here!

Delivery Content::

1 x battery with BMS and mounting rail

2 x keys (battery backup)

1 x 3A aluminum charger with LED charging indicator

SKU Voltage Capacity Dimension Weight Charge Continuous discharge current
Manufacturer/Description Motorpower
GRBB48011753PS 48v 17,5ah 365*90*110mm 4,3kg 3A 30A Sanyo NCR18650GA 3500mah 500-1500w

This quality battery pack is made with high quality 13S5P - Sanyo NCR18650GA 3500mah / 840 W/h

This article is recommended by us especially  BBS02 und HD Bafang Motors engines!

With an adapted BMS for optimum charging and discharging voltage.

Current output 30A (countinuous load ) to 60A < 800 charging cycles.

CC-CV - Charger 3A in aluminium case with fan.

Available in case colour - black

How do I charge my bike battery and e-bike power cells?

  • (a).Connect the charger to the battery
  • (b).Now connect the charger to your 220V socket
  • (c). When the battery is fully charged! First unplug the power cord (220V) and then unplug the charger cable from the device.

Always recharge the battery before commissioning and observe the following when charging for the first time:

If the green LED on the charger lights up, please allow it to charge for about two hours to balance the cells of your battery completely.


1. How long does the charging process take?

  • With a 4A charger about 4-5 hours.


2.When charging is complete, you should disconnect the battery from the charger?

  • Yes, it is always safer! Please repeat the procedure as described in the first charging process as often as you can to give your battery a maximum of service life.


3.How do I charge the battery on my bike?

  • Find the best and most stable place on the bicycle for safe attachment and be sure the battery is protected in a bag, container and padded.


4.Important instructions:

  • Do not use or store the battery / battery in high temperature or open fire.
  • Do not mix plus and minus battery when connecting.
  • Take care that the battery does not get too moist and / or comes into contact with water or chemicals.
  • Store the battery / battery dry.
  • When storing, recharge every 2 months.
  • Use only the battery charger supplied with the battery .
  • Do not open the battery yourself!
More Information
Time of delivery
available immediately
status
on Stock
Write Your Own Review
You're reviewing:Force III+ Super Power Battery Pack 48V 17,5Ah Panasonic / Sanyo
Your Rating

Your inquiry

* Required fields

To Top