TIGERSHARK DS-6C Battery Pack with USB-Port 36V 19,2Ah LG and 4A charger
TIGERSHARK DS-6C Battery Pack with USB-Port 36V 19,2Ah and 4A charger
TIGERSHARK DS-6C Battery Pack 36V 19,2Ah with USB and 4A Charger
LG18650MH1 3200mah - Super Power / 691 wh (watt hours) with mounting rail !
- Nominal capacity: 19,2Ah
- BMS with 30A continuous discharge voltage up to 60A
- USB-Port with up to 1A charging current
- easy mount in bike triangle
- integrated charging display
- On- / Off-Switch
- splash proof
- lockable
| SKU | Voltage | Capacity | Dimension | Weight | Charge | Continuous discharge current |
Manufacturer/Description | Motorpower |
| GRBB36011922TS | 36v | 19,2ah | 335*80*132mm | 3.8kg | 4A | 30A | LG18650MH1 3200mah | 250-750w |
This quality battery pack is made with high quality LG18650MH1 3200mah 10S6P / 691 W/h
This article is recommended by us especially BBS01 und BBS02 Bafang Motors engines!
With an adapted BMS for optimum charging and discharging voltage.
Current output 30A (countinuous load ) to 60A < 800 charging cycles.
CC-CV - Charger 4A in aluminium case with fan.
Available in case colour - black
How do I charge my bike battery and e-bike power cells?
- (a).Connect the charger to the battery
- (b).Now connect the charger to your 220V socket
- (c). When the battery is fully charged! First unplug the power cord (220V) and then unplug the charger cable from the device.
Always recharge the battery before commissioning and observe the following when charging for the first time:
If the green LED on the charger lights up, please allow it to charge for about two hours to balance the cells of your battery completely.
1. How long does the charging process take?
- With a 4A charger about 4-5 hours.
2.When charging is complete, you should disconnect the battery from the charger?
- Yes, it is always safer! Please repeat the procedure as described in the first charging process as often as you can to give your battery a maximum of service life.
3.How do I charge the battery on my bike?
- Find the best and most stable place on the bicycle for safe attachment and be sure the battery is protected in a bag, container and padded.
4.Important instructions:
- Do not use or store the battery / battery in high temperature or open fire.
- Do not mix plus and minus battery when connecting.
- Take care that the battery does not get too moist and / or comes into contact with water or chemicals.
- Store the battery / battery dry.
- When storing, recharge every 2 months.
- Use only the battery charger supplied with the battery .
- Do not open the battery yourself!
